Four stages, one site — all of them at the Haoxin factory in Qingzhou: fabrication, assembly, commissioning and final inspection. Every machine leaves with its own inspection record, and that record can be shared with your engineer before shipment.
Frames and loader arms are fabricated and welded on site, then assembled with axles, transmission and hydraulics, commissioned and tested. Because the stages sit next to each other, a problem found at inspection can be corrected before the machine is packed — not after it reaches the port.
Cutting, forming and welding of the frame, arms and bucket. Weld quality is checked before the structure moves to paint.
Axles, transmission, engine, hydraulic lines and cab are fitted to the agreed configuration, with component numbers recorded.
Each machine is started, run and operated with its bucket or attachment: lifting, steering, braking and hydraulic functions under load.
Final checks on torque, leaks, electrical functions and paint. The inspection sheet is signed and travels with the machine.
This is the checklist our workshop works from. If you need a specific test, or a third-party inspection before shipment, tell us at order stage and we will confirm it in the order.
We are in the Qingzhou Economic Development Zone, about two hours by expressway from either Jinan or Qingdao airport. Visits can be arranged so that the machines you want to see are on site when you arrive.
No.280 Chixing Road, Economic Development Zone,
Qingzhou City, Shandong Province, China
山东省青州市经济开发区齿兴路 280 号
| From Jinan Yaoqiang Airport (TNA) | ≈ 2 h by car |
|---|---|
| From Qingdao Jiaodong Airport (TAO) | ≈ 2 h by car |
| By high-speed rail | Qingzhou North Station · ≈ 15 min by car |
| From Qingdao Port | ≈ 2.5 h by car |
Times are approximate and depend on traffic. Send us your flight or train number in advance and we will arrange pickup at the station or the airport.
